Overview
Wheeled mini excavator is suitable for small-scale civil engineering, trenching, shed, bridge construction, mine construction and other kinds of narrow working environment, which is very conducive to the construction of narrow sites operations.
Each part of our small earth mover has its own number mark and certificate of conformity. Full hydraulic balance cylinder and one-key switch that ean not only to play a shock-absorbing role, but also to be a good balance of the body. The whole machine has stronger bearing capacity and better stability compared with pervious types. The overall size of the shovel is enlarged and thickened, which ia able to bulldoze soil and stabilize the body. Luxurious cab + cold and warm air conditioning + aviation seat + intelligent monitoring system is giving you a comfortable control experience.
Specific Data
| DIMENSIONS | |
| Overall Length | 6020mm |
| Overall Width | 2250mm |
| Overall Height | 2910mm |
| Spread of Axles | 2500mm |
| Tyre Diameter | 750mm |
| Width of Grounding | 490mm |
| Track | 1755mm |
| Min Height Above Ground | 328mm |
| Width of Bulldozing | 2250mm |
| Rising Distance of Bulldozing | 500mm |
| Height of Bulldozing | 85mm |
| Width of Bucket | 720mm |
| RANGE OF OPERATION | |
| Max Digging Reach | 6800mm |
| Max Digging Depth | 3980mm |
| Max Digging Height | 7410mm |
| Max Dumping Height | 5290mm |
| Min Front Radius | 2115mm |
| Min Tail Radius | 1945mm |
| TECHNICAL SPECIFICATION | |
| Engine | YUCHAI 4DK |
| Power/Speed | 56kw/2200rpm |
| Machine Weight | 8300kg |
| Volume of Bucket | 0.30-0.45m³ |
| Set Pressure of Main Overflow Valve | 25MPa |
| Max Digging Force | 45kN |
| Gradeability | 35° |
| Max Traction Force | 50kN |
| Max Travel Speed | 30km/h |
| Swing Speed of Platform | 11rpm |
| Fuel Tank Capacity | 180L |
| Hydraulic Tank Capacity | 165L |
Considerate Tips
1. Using Armlists and Stepladders
Falling is one of the main reasons that drivers get hurt. So it bacomes quite important to use the armlists and stepladders when getting in and getting out of the machine.
-
When get in and down the cab, please remember face the machine and make your hands and foot, amrlist and stepladders touching.
-
Don't use any operating lever as your armlists.
-
You had better not jump up or jump down the machins, especially get into or out of any moving or working excavator.
2. Adjusting a Suitable Seat Position
-
Remember to re-adjust the seat position after getting back into the cab.
-
The key point is that the driver is supposed to step the paddle in the max degree when backing on the backrest. What's more, make sure you are capable to control the controlling lever when you are in the right position on the seat.
3. Fastening the Seat Belt
If the user didn't fasten the safe belt, he or she will get hurt or even get rid of the cab room when the turnover accident happened. What's worse, the driver is probably be overwhelmed by the machine causing even more serious damage.
-
The significant one is to check all the parts of thee belt before operating the machine. Once found any damage, you had better not start the excavator until the belt and its parts got changed.
-
It is advised that the belt is expected to be changed every three years even if it is still in good position.
