Basic Information
The bucket tooth kit of excavator is an important part of excavator, which is similar to human teeth. It is also a vulnerable part. It is a combined bucket tooth composed of tooth seat and tooth tip, which are connected by pin shaft. As the bucket tooth wear failure part is the tooth tip, just replace the tooth tip.
Producing Process
Process flow of bucket teeth: sand casting, forging and precision casting.
Sand casting: the cost is the lowest, and the process level and bucket tooth quality are not as good as precision casting and forging casting.
Forging: the cost is the highest, and the process level and bucket tooth quality are also the best.
Precision casting: the cost is moderate, but the requirements for raw materials are very strict, and the process level is relatively high.
The wear resistance and quality of some precision casting bucket teeth even exceed that of forging casting bucket teeth due to batching. Precision casting bucket teeth is the mainstream manufacturing process of bucket teeth in the market.
Our Catalogue
|
KOMATSU |
PC20; PC30; PC40; PC60-5; PC75; PC78UU; PC100-5; PC200-5; PC200-7; PC300; |
|
HITACHI |
ZAX55; ZAX200; ZAX240; EX60-2; EX60; EX70; EX120; EX200-2; EX200-3; EX300-5; EX400; EX150 |
|
CATERPILLAR |
E70B; E305.5; E120B; E312; E320; E324; E325; E330B; E330C; E345 |
|
SUMITOMO |
SH60; SH75A3; SH120; SH120A3; SH200; SH240; SH350 |
|
KOBELCO |
SK200; SK230; SK200-8; SK250-8; SK330; SK460; SK270; SK120; SK130-8; SK140; |
|
KATO |
HD250; HD450; HD700; HD1250; HD1430 |
|
DAEWOO |
DH55; DH80; DH150; DH220-5; DH258; DH300 |
|
HYUNDAI |
R60-5; R60-7; R80; R130; R250-9; R200; R225-7; R290; R305; R455 |
|
YANMAR |
YC35; YC60; YC75; YC85; YC100; YC135 |
|
VOLVO |
EC55; EC210; EC240; EC290; EC360; EC140; EC700 |
|
OTHER |
JBT60; U-85; LG60; LG60B; IHI60; IHI50J; H45; DX60; DX260; SY200; CLG936; |
If you can't search model which you need in this catalog, please contact us.
Our Strength
1. Bottom rollers are made availably for 3~100tons machinery, complete interchangeability with current market.
2. All types of rollers can be created depending on your needs.
3. Roller body with high precision, heat treated to ensure the hardness and wearing.
4. Other parts with high precision, heat treated to ensure the hardness and wearing.
5. Use stronger seal to ensure good sealing and bottom roller life.
