Quick Overview
Mini excavator bucket tooth is an important part of the excavator, similar to human teeth, and it is also a wearing part that is a combination of tooth adapter and tooth tip bucket teeth. These two connect with each other relying on the pin connection.
Types
Here are two main different process of producing bucket teeth: normal casting, and forging. As a result, coming a sorting type based on the producing way.
Normal casting: The cost is moderate, but the requirements for raw materials are very strict, and the technology level is also high. The quality and the price and the producing requirements are all in the middle between sand casting and forging teeth.
Forging: The highest cost and the best quality.
Catalogue
|
KOMATSU |
PC60; PC60-A; PC100; PC100-25MM; PC200; PC200-30MM; PC200-35MM; |
|
HITACHI |
ZAX70; ZAX200; ZAX200-3G; ZAX240; ZAX360-5G; ZAX360; ZAX470 |
|
CAT |
CAT305; CAT307; CAT311; CAT312; CAT315; CAT315-35MM; CAT320; CAT320-40MM; CAT322; CAT325; CAT330; CAT345; CAT365; CAT374; E200B; K110; K130; K170; J200; J225; J250; J300; J350; J400; J460; J550 |
|
KOBELCO |
SK200; SK200Z; SK200-35MM; SK200A-40; SK230; SK230A-40; SK230B-40; SK350; |
|
DAEWOO |
DH55; DH60; DH130; DH150; DH220; DH220-35MM; DH220-40MM; DH280; DH300; |
|
HYUNDAI |
R130; R140; R200; R215; R215-9; R225-7; R225-9; R300; R350; R360; R385; R420; |
|
VOLVO |
VOLVO140; VOLVO210; VOLVO290; VOLVO360; VOLVO460; VOLVO480; VOLVO700; ESCO18S; ESCO22S; ESCO25S; ESCO35S; ESCO40S; V17; V17AD; V19AD; V20AD; V39; V51; V61; ESCO U series; |
|
OTHER |
SY60; SY75; EX70; E200B; LG85-A etc. |
This catalog including forging and casting. If you have request for forging or casting, please contact us.
If you can't search model which you need in this catalog, please contact us.
Tips
The excavator bucket teeth are the end of the excavator's working device, and they are the most loaded part in the excavation process. They are easy to wear out, especially in the stone construction environment, where they wear out especially fast. When the tip of the bucket teeth is worn out, the force required to cut into the excavator during the excavation operation will increase greatly, thus resulting in greater fuel consumption and affecting the work efficiency. Therefore, it is necessary to replace the bucket teeth with new ones in time when the wear and tear of the bucket teeth is more serious.
