Product Tag: Changing Teeth On A Excavator Bucket

Basic Information The rubber track mini excavator cab rotates 360 degrees, allowing the operator to dig, move and tilt things like gravel and dirt while the standard excavator stops. The excavator is attached to the front of the excavator with boom, stick and bucket. The bucket arm is sufficient…

General Information Hydraulic excavator is mainly composed of engine, hydraulic system, working device, walking device and electrical control. The hydraulic system consists of hydraulic pump, control valve, hydraulic cylinder, hydraulic motor, pipeline, oil tank, etc. The electrical control…

What are the specific excavator bucket parts names? source from https://dheparts.com/product/excavator-buckets/ As you can see, even it is just a simple bucket, there still are many parts with it. But don't worry, we paid attention to every parts even though it is a tiny bolt and nut. Of…

Hydraulic Excavator Bucket Capacity As for one of the hydraulic excavators, XINYUAN C70, its buckeet capacity is about 0.25-0.40m³. Looking for other specific information about this type machine, please see the chart below: Parameter of Xinyuan C70 These are some basic parameters about XINYUAN…

What is a hydraulic excavator? A hydraulic excavator is a heavy machine that has various sizes, a hydraulic arm with a blade at the tip, designed to move on wheels or chains, and also has the ability to rotate 360 degrees on its own axis. Among its functions are to excavate, rotate, move, load,…

Single flange roller and double flange roller is applied in special model of crawler excavators and bulldozers from 5T to 100T. Track rollers are widely applied in bulldozers and excavators like Komatsu, Hitachi, Kobelco and Hyundai etc.

1.Highly-operated power and hydraulic system
2.Blowing parallel radiator
3.A cozy operation room with wide operation range
4.New board platformis designed with“Double-C Type”edge
5.Plastic fuel container
6.Convenient maintainability

There are two manufacturing processes of bucket teeth: forging and casting. According to the application range, the bucket teeth can be divided into tiger, flat and rock. The bucket teeth are installed on the buckets with corresponding adapters.

There are two manufacturing processes of bucket teeth: forging and casting. According to the application range, the bucket teeth can be divided into tiger, flat and rock.