The Bucket for Excavator is…..
Buckets are common attachments used on the sticks of backhoe loaders and excavators. Buckets for excavators and backhoes are designed to dig trenches or other excavations. Using a coupler, the carrier machine can swap out buckets in order to match the application.
Excavator buckets are digging attachments with teeth that can be fixed to the a rm of an excavator. The buckets are controlled by the excavator operator using controls in the cabin. There are different types of excavator buckets that are used depending on where the digging has to be done.
Excavator buckets can also be used to move dirt or load dump trucks for transportation to dumping sites. Excavators are used in conventional trenching methods for laying pipelines and also used for digging trial pits for geotechnical investigation.
Excavator bucket dimensions and specifications are quite important to focus on. It illustrates the bucket capacity and whether suits your excavator. 20 ton excavator bucket is a large one. And, of course, it has larger space and room for driver to dig or load.
Our Catalogue
|
KOBELCO |
SK15; SK020; SK045; SK60; SK75; SK60-5; SK70; SK75; SK120; SK130-8; SK140; SK200-8; SK200; SK230; SK250-8; SK270-8; SK330; SK460 |
|
DAEWOO |
DH55; DH150; DH220-5; DH258; DH300; DH370; DH400; DH420; DH500 |
|
CAT |
CAT301.8; CAT302.5; CAT304; E60B; E307D; E305.5; E306; E312; E320; E325; E330B; |
|
KOMATSU |
PC05; PC10-7; PC12; PC15R; PC20; PC30; PC35; PC40; PC45; PC50; PC60-5; PC75; |
|
VOLVO |
EC80; EC140; EC210; EC240; EC290; EC300; EC350; EC360; EC460; EC480; EC700 |
|
HITACHI |
ZAX55; ZAX60-7; ZAX200; ZAX240; ZAX270; ZAX330; EX12; EX15; EX20; EX25; EX40-1; EX45; EX50; EX55; EX60-2; EX70; EX120; EX135; EX200-2; EX200-3; EX300-5; EX400 |
|
HYUNDAI |
R60-5; R130; R150-9; R275-9; R290; R305 |
|
YANMAR |
YC35; YC60; YC85; YC135 |
|
DOOSAN |
DX60; DX260; DX300; DX380; DX500 |
|
OTHER |
HD140; HD250; SH120; SH240; SC360; KY70; BD2G; D20; D31; Z; 220; TB125; TB135; |
If you can't find model which you need in this catalogue, please contact us.
Excavator buckets also need to be checked very often
The daily maintenance of an excavator can be reduced by 70% if you check the fuel, oil, water and air every day. If you want to make your machine work better, more economically, and in the best condition to create more value for you, take 2 minutes per day to check the bucket. The main check is the degree of wear on the bucket body and whether there are cracks, and if the wear is serious, you should consider reinforcement. If there is a crack in the bucket body, you should weld it in time to avoid delaying the repair and increasing the length of the crack, making it impossible to maintain. In addition, kick the bucket teeth to check whether the bucket is stable, and if the bucket teeth are loose, they should be tightened immediately.
